I am Scott Paul, a leading exterior paver restoration contractor and business owner with over 30 years of experience in sealing and protecting. For info about who I am, please read my full bio here.
Best Sealer for Indoor Concrete Update
I am a trusted resource for concrete sealer tips and unbiased reviews. Through 2025, I will continue to recommend Masonry Saver Saver Stamped Concrete for indoor concrete. If you have questions about the best sealer for indoor concrete, we want to hear from you! Feel free to leave me a comment with the pictures below.
Surfaces such as indoor concrete can be sealed to protect against stains while offering a beautiful, enhanced appearance. For an enhanced look with a little gloss, the best sealer for indoor concrete that I have found is the Masonry Saver Saver Stamped Concrete Concrete Sealer. This versatile sealer can be used for indoor concrete surfaces such as stamped, decorative, brick, stone, and other masonry surfaces. Masonry Saver Saver Stamped Concrete Concrete Sealer protects concrete and masonry surfaces from color loss due to ultraviolet light. It also provides shielding against moisture, abrasions, and normal wear and tear.
This non-yellowing acrylic polymer blend concrete sealer can be applied over both existing water-based and solvent-based sealers with no adhesion problems. It provides an attractive semi-gloss finish. This indoor concrete sealer is easy to use and rapidly dries. Masonry Saver Saver Stamped ConcreteConcrete sealer protects all types of masonry and concrete surfaces from color fade. In addition, this sealer also makes indoor concrete surfaces washable, stain-free, and easy to maintain. This durable acrylic blend resin sealer will also help dustproof concrete surfaces.
Masonry Saver Stamped Concrete Sealer can also aid in the color loss of indoor concrete surfaces by enhancing the color with a look similar to a “wet look” appearance with just enough shine. Maintenance with Masonry Saver is easy. Once the sealer begins to fade, a single coat of Decorative Concrete Sealer can be applied once the surface has been prepped correctly. This product should not be reapplied more often than every 18-24 months to prevent unnecessary build-up.
Use the best sealer for indoor concrete to guard against color fade, moisture, and wear. Create a dust-free “wet look” shine that will enhance the natural beauty of your indoor concrete, stone, and masonry surfaces with the best-designed product, Masonry Saver Saver Stamped Concrete Concrete Sealer.
Different Types of Concrete Sealers Video
We are building a barndominium, and keeping the concrete floors bare. We like the natural look of the concrete but need to seal it from stains from foot traffic (oil, dirt, red mud). What sealer would you recommend for a low to semi gloss finish? We also prefer to use a sprayer for application. Thank you!
If you want it to have a sheen and prevent stains, you would need a clear top coating like this:
https://www.restore-a-garage.com/restore-a-garage-epoxy/restore-a-garage-clear-top-coat/flypage.tpl.html
Hi Paul, thank you. The link did not work, it took me to a 404 page.
Try this:
https://www.restore-a-garage.com/restore-a-garage-clear-top-coat
And this product would work as well:
https://www.opwdecks.com/sb-6715-surfacepro-rtu-5-gallon.htm
Our floors were ground down using a 300 diamond pad. After grinding they finished the floor with burnishing. The burnishing machine used was in the area of 2500 rpm or greater with heat / propane. I would now like to seal to protect from staining and to freshen up the appearance. I’ve seen others that have applied products for clear sealer that chip over time unless you have it redone every couple of years. And a couple years is just about the same term length of their warranty. What is the best maintenance free concrete sealer for interior use? I… Read more »
Try a clear coat epoxy or a clear top coat.
https://www.restore-a-garage.com/restore-a-garage-epoxy.html
Hello, I used self leveling quick dry on my interior floor. The color is uneven and not pretty. Is it possible to unify the color and seal it with one surface treatment product? If so, how should the surface be prepared? The surface is very dusty.
No, that will not work.