The line of SuperSeal Paver and Concrete Sealers by Clemons Concrete Coatings is popular among professionals and homeowners alike. The SuperSeal Matte review is similar to their higher content sealers but with an additive that reduces the shine. SuperSeal Matte will darken the appearance and add a slight wet look without the high gloss finish. The SuperSeal Matte is a toned down wet look solvent-based sealer that is best used on decorative and stamped concrete as well as exposed aggregate and brick pavers. It can be applied to paver sand joints and will help harden and solidify the sand to reduce unwanted weed growth and erosion.
Paver sealers come in several different types of finishes. Sealer finishes can range from a matte or semi gloss to a high gloss or wet look appearance. In this article we want to address shiny paver sealers and how they differ from other finishes such as a wet look sealer, and yes there is a difference.
All paver sealers are used to help solidify sand joints between pavers, lock out unwanted moisture, reduce weed growth, reduce freeze and thaw damage, and of course to create a beautiful long lasting finish. In terms of the final finish of a sealer, a matte finish will not alter the appearance of the pavers while a shiny paver sealer will leave a glossy appearance. A wet look sealer will leave the pavers looking wet even after the sealer has dried but is not designed to add a shine.
Sealing pavers is an excellent way to enhance and preserve their appearance. There are certain paver sealers that will bring out the natural colors of the pavers while locking out moisture, which will help preserve and increase their longevity. The sealer also helps to solidify the sand joints and can help with weed growth and freeze/thaw damage that may occur in colder climates.
There are several different finishes involved with paver sealers. A matte finish will not alter the appearance of the pavers at all but will still preserve the surface and keep out unwanted moisture. Typically a matte finish sealer is water-based. Besides a matte finish you can also go for a shiny or wet look. So what is the difference between a shiny vs. wet look paver sealer? There is a slight difference in appearance and also in the formula that makes up either sealer.
Newly installed pavers can add curb appeal to your outdoor areas as well as create a usable surface. A new paver installation will not stay looking new long unless it is protected from normal use and natural elements. Unprotected pavers will begin to lose color and may shift or become damaged due to unwanted water intrusion. Weeds will begin to grow up in the sand joints causing an unsightly appearance. Heaving and shifting of the pavers may occur due to freeze and thaw damage. To avoid these issues and protect your new paver invest it is important to apply a paver sealer.
A quality paver sealer will protect against color fading, water intrusion, sand erosion and weed growth keeping your pavers looking new. The best sealer for new pavers comes down to several choices. For an enhanced appearance and superb protection, try SuperSeal 25 or SuperSeal 30. These solvent based sealers contain a high percentage of solids giving new pavers a glossy wet look while offering all the protection they need from harsh elements and foot traffic. SuperSeal will also penetrate the sand joints to create a solid joint free from erosion and weed invasion.
In order to preserve pavers it is necessary to seal them. This solidifies the sand joints, helps reduce weed growth, locks out moisture, and reduces freeze/thaw damage. Sealing pavers can also enhance their natural beauty. There are several different finishes available for brick pavers. A matte finish would protect the pavers from the elements but would not alter their appearance. For those looking for a more enhanced look that is not shiny or glossy, a “wet look” may be the answer.
A wet look appearance is just like the name implies, the bricks look wet but not shiny. The wet look sealers are also less slippery when wet unlike glossy finishes. The best paver sealer with wet look but no shine comes down to a couple of choices. One of the best according to the reviews for the best paver sealer with wet look but no shine is Supreme Shield SB-600 Paver Sealer. This solvent based penetrating sealer results in an enhanced color, wet look finish without the fake glossy or plastic appearance. Supreme Shield SB-600 is water, salt, stain, and oil resistant to protect your pavers and preserve their beauty. This easy to use paver sealer is perfect for stamped concrete, concrete pavers, as well as other porous concrete surfaces.
Paver and concrete sealers are used to prolong the life of patios, driveways, pavers, masonry, and many other brick and concrete surfaces. They repel water and moisture and help to maintain the beauty of these types of surfaces. Most paver and concrete sealers can be applied by anyone using the proper application tools. Always follow the application methods recommended by the manufacturer. In addition, it is best to only apply sealers to a clean, dirt free surface. Therefore washing the surface properly is highly recommended prior to applying any type of sealer. Not doing so may jeopardize the sealer’s effectiveness and longevity.
The best application tools for paver sealers and concrete sealers may be purchased from the same online authorized dealer where you purchase your sealer. Application tools can vary but most widely used are brushes, stain pads, rollers, and a quality pump up sprayer. The type of sealer may determine how it is best applied. Wet look or shiny sealers can be thicker in nature and may not apply well using a pump sprayer. A large brush or roller may work best.