The line of SuperSeal Paver and Concrete Sealers by Clemons Concrete Coatings is popular among professionals and homeowners alike. The SuperSeal Matte review is similar to their higher content sealers but with an additive that reduces the shine. SuperSeal Matte will darken the appearance and add a slight wet look without the high gloss finish. The SuperSeal Matte is a toned down wet look solvent-based sealer that is best used on decorative and stamped concrete as well as exposed aggregate and brick pavers. It can be applied to paver sand joints and will help harden and solidify the sand to reduce unwanted weed growth and erosion.
Sealing pavers is an excellent way to enhance and preserve their appearance. There are certain paver sealers that will bring out the natural colors of the pavers while locking out moisture, which will help preserve and increase their longevity. The sealer also helps to solidify the sand joints and can help with weed growth and freeze/thaw damage that may occur in colder climates.
There are several different finishes involved with paver sealers. A matte finish will not alter the appearance of the pavers at all but will still preserve the surface and keep out unwanted moisture. Typically a matte finish sealer is water-based. Besides a matte finish you can also go for a shiny or wet look. So what is the difference between a shiny vs. wet look paver sealer? There is a slight difference in appearance and also in the formula that makes up either sealer.
Paver and concrete sealers are used to prolong the life of patios, driveways, pavers, masonry, and many other brick and concrete surfaces. They repel water and moisture and help to maintain the beauty of these types of surfaces. Most paver and concrete sealers can be applied by anyone using the proper application tools. Always follow the application methods recommended by the manufacturer. In addition, it is best to only apply sealers to a clean, dirt free surface. Therefore washing the surface properly is highly recommended prior to applying any type of sealer. Not doing so may jeopardize the sealer’s effectiveness and longevity.
The best application tools for paver sealers and concrete sealers may be purchased from the same online authorized dealer where you purchase your sealer. Application tools can vary but most widely used are brushes, stain pads, rollers, and a quality pump up sprayer. The type of sealer may determine how it is best applied. Wet look or shiny sealers can be thicker in nature and may not apply well using a pump sprayer. A large brush or roller may work best.