MasonrySaver No-Rinse Concrete Etch – No need to rinse or neutralize prior to applying a stain or sealer
Product Summary
- MasonrySaver No-Rinse Concrete Etch works on all concrete, stone, tile, or brick surfaces prior to sealing.
- The etching compound only generates upon evaporation and contact with SiO2 or metal oxide.
- No neutralization or rinsing is required after application, simplifying the preparation process significantly.
- Saves time by allowing sealers or stains to be applied within hours instead of days.
MasonrySaver® No-Rinse Concrete Etch is a hydrofluoric acid-etching material designed for etching concrete or other masonry surfaces prior to coating or sealing. A thin film of Etch will etch any concrete surface in 15 seconds. After using MasonrySaver® No-Rinse Concrete Etch, a stain or protective sealer such as MasonrySaver® Decorative Concrete Sealer may be applied directly over the etched surface once the substrate has completely dried.
Product Uses:
Use MasonrySaver® No-Rinse Concrete Etch to etch concrete, brick or masonry surfaces prior to sealing.
Use MasonrySaver® No-Rinse Concrete Etch to etch concrete, brick or masonry surfaces prior to sealing.
Product Benefits:
- Etches all concrete, stone, tile or brick surfaces
- Only generates the etching compound upon evaporation and contact with SiO2 or metal oxide
- Doesn’t require neutralization or rinsing
- Saves time – apply sealers or stains within hours instead of days
