Category: Stamped Concrete Sealer Reviews
SuperSeal30 Paver and Concrete Sealer Review
SuperSeal30 Concrete Sealer
Update May 2017
As of 2017, we have found that the Super Seal 30 Gloss is one of the most popular sealers for Stamped Concrete, Brick Pavers and other Decorative Concrete Surfaces. If you have any questions on this product, please ask below in our Q&A area. We are here to help!
SuperSeal30 is a Higher Gloss Concrete Sealer that can be used for many different types of concrete surfaces. SuperSeal30 is very popular for Brick Paver Patios, Exposed Aggregate, and Stamped Concrete. This sealer will darken the appearance and leave a shine.
The SuperSeal30 is a solvent based breathable acrylic sealer.
SuperSeal30 Paver and Concrete Sealer Scores (1-10)
Wet Look: 10
– SuperSeal30 contains 30% solid content of acrylic. It darkened our 4-year-old paver patio as if wet with water and stayed that way after drying. Enhanced the natural red and brown tones in our paver bricks.
Gloss Level: 9
– The high solid content of the SuperSeal gave our paver patio a high gloss shine. The overall appearance on out test patio was quite rich looking but not too shiny that it looked “fake”. The sealer was slightly slippery for the first couple of weeks when it rained but after full curing, that was not an issue.
Supreme Shield SB-600 Wet Look Review
Update May 2017
As of 2017, we have found that the Supreme Shield SB-600 is the most popular sealers when looking for a wet look without the gloss or shine. This can be used for Stamped Concrete, Brick Pavers and other Decorative Concrete Surfaces. If you have any questions on this product, please ask below in our Q&A area. We are here to help!
SUPREME SHIELD SB is a solvent-based penetrating sealer designed for stamped concrete, concrete pavers and other porous concrete surfaces. Application of SUPREME SHIELD SB will enhance the color and give the wet look without adding the gloss and plastic look associated with other traditional film forming sealers. Once treated, the surface repels water and oil to prevent staining.
SuperSeal30 Paver and Concrete Sealer Scores (1-10)
Wet Look: 10
– The Supreme Shield SB-600 will add a rich wet look, similar to any other solvent based paver or stamped concrete sealers.
Gloss Level: N/A
– This product is not designed to add a shine.
SuperSeal25 Semi-Gloss Paver and Concrete Sealer Review
SuperSeal25 Concrete Sealer
Update May 2017
As of 2017, we have found that the Super Seal 25 Semi-gloss is one of the most popular sealers for Stamped Concrete, Brick Pavers and other Decorative Concrete Surfaces. If you have any questions on this product, please ask below in our Q&A area. We are here to help!
SuperSeal25 is a Semi-Gloss Concrete Sealer that can be used for Brick Paver Patios, Exposed Aggregate, and Stamped Concrete. This sealer will darken the appearance and leave a shine similar to a semi-gloss.
The SuperSeal25 is a 25% solid solvent based breathable acrylic sealer and curing compound. This product is suitable for use on interior and exterior concrete surfaces.
SuperSeal25 Paver and Concrete Sealer Scores (1-10)
Wet Look: 10
– SuperSeal25 darkened the paver driveway very well giving the surface a much needed enhanced look. All of the colors in the pavers stood out, restoring the original look.
Gloss Level: 8
– SuperSeal25 contains 25% solids. This left a semi-gloss shine to our driveway. The sealer dried in a few hours and we were able to drive on the surface the next day.
SuperSeal Matte Review
The line of SuperSeal Paver and Concrete Sealers by Clemons Concrete Coatings is popular among professionals and homeowners alike. The SuperSeal Matte review is similar to their higher content sealers but with an additive that reduces the shine. SuperSeal Matte will darken the appearance and add a slight wet look without the high gloss finish. The SuperSeal Matte is a toned down wet look solvent-based sealer that is best used on decorative and stamped concrete as well as exposed aggregate and brick pavers. It can be applied to paver sand joints and will help harden and solidify the sand to reduce unwanted weed growth and erosion.
How To Fix Concrete Sealer Bubbles
Concrete Sealer Bubbles
Solvent based Acrylic Concrete Sealers are designed to enhance, darken, and give a sheen to decorative concrete surfaces. Unfortunately when applied incorrectly or over applied you may have issues with “bubbles” forming in the sealer. This typically happens to Stamped Concrete or smooth decorative concrete surfaces.
When a solvent-based acrylic sealer is applied, some of the sealer penetrates into the porous concrete. If the application is too thick, or if too many coatings are applied, the solvent is not able to evaporate before the sealer dries. When that happens, the solvent gets trapped and eventually creates enough pressure that it forces its way out, creating the bubbles.
SuperSeal VOC Concrete and Paver Sealer
SuperSeal VOC Compliant Sealer
This is a Low VOC solvent based concrete sealer that is compliant for states that restrict the Volatile Organic Compounds to a 250 limit.
The SuperSeal VOC is a 25% solid solvent based acrylic that is primarily used for all exterior decorative concrete such as Brick Pavers, Stamped Concrete, Exposed Aggregate, etc. This sealer will darken the appearance and leave a shine similar to a semi-gloss.
It was one of a handful of solvent based sealers of this type that can still be shipped to states such as California.
Note: This sealer has the same properties as the SuperSeal25 but with an exempt solvent that allows it to be used for Low VOC restricted states.
SuperSeal VOC Paver and Concrete Sealer Scores (1-10)
Wet Look: 10
– SuperSeal VOC enhanced the Stamped Concrete patio dramatically. The gray and red colors in the dye of the concrete were restored and enhanced to a rich color.
Gloss Level: 7
– SuperSeal VOC is a 25% solid styrene acrylic sealant. After drying the patio had retained a semi-gloss shine, Overall appearance was uniform and no bubbles in the sealer were present.
MasonrySaver Decorative Concrete Sealer Review
MasonrySaver Decorative Concrete Sealer
MasonrySaver Decorative Concrete Sealer is a non-yellowing acrylic polymer blend sealer formulated for use on properly cured stamped concrete surfaces. MasonrySaver Decorative Concrete Sealer dust proofs concrete with a durable acrylic blend resin. MasonrySaver® Decorative Concrete Sealer leaves an attractive, non-yellowing durable gloss finish that protects concrete from damage and color loss due to ultra-violet light, moisture, and abrasion/wear.
This sealer can be applied on top of previously applied solvent or water based sealers without creating an adhesion issue.
Applied to a Stamped Concrete Patio.
MasonrySaver Decorative Concrete Sealer Scores (1-10)
Wet Look: 7
– The MasonrySaver Decorative Concrete Sealer did darken the surface similar to other water based sealers. Overall enhancing of the surface was acceptable but not as good as a solvent based sealer.
Gloss Level: 8
– We applied 2 coats of the sealer at 150 square feet per gallon. The gloss level was a semi-gloss shine after drying.
Glaze N Seal Wet Look Sealer Review
Glaze N Seal Wet Look
The original Glaze N Seal “Wet Look” Lacquer provides beautiful high gloss protection to decorative concrete, masonry, and natural stone. For use on porous materials. A clear, non-yellowing sealer that resists tough oils, water, and acid – indoors and outdoors. Deep bonding formula resists peeling, cracking, UV degradation and efflorescence. Great for driveways, patios, fountains, and pond.
Glaze ’N Seal is a crystal clear, high solids acrylic coating designed to protect and beautify concrete, masonry and tile surfaces. This super-tough film was formulated for interior or exterior use. Walk on it – drive on it (it does reject organic stains). It offers ultimate protection in a clear finish.
Brick Paver Patio – 1 coat applied.
Glaze N Seal Wet Look Sealer Scores (1-10)
Wet Look: 8
– Glaze N Seal Wet Look is an excellent wet look sealer. The brick paver patio that we applied to had never been sealed since it was installed 6 years ago. The Glaze N Seal enhanced the gray and red paver bricks as if they were wet with water. The customer was very happy after application.
Gloss Level: 6
– Of the solvent based sealers, Glaze N Seal Wet Look is not the shiniest. The final gloss level after applying 2 coats was a nice matte shine.
V-Seal Industra-Gloss SB
V-Seal Industra Gloss SB
INDUSTRA-GLOSS SB is a high-performance proprietary formulation of pure acrylic resin in a solvent base. Can be used as a cure, sealer and as a stain resistant surface protector. INDUSTRA-GLOSS SB is excellent for exterior and interior on most horizontal and vertical surfaces.
Driveways | Patios | Pavers | Stamped concrete | Garages | Showrooms | Exposed aggregate | Decorative Concrete
Tested on Stamped Concrete – 1 coat applied.
V-Seal Industra-Gloss SB Gloss Scores (1-10)
Wet Look: 9
– V-Seal Industra-Gloss SB gave a beautiful wet look to our stamped concrete patio. This sealer enhanced the red and brown colors extremely well. Exactly what you would expect with a high solid, solvent based acrylic sealer.
Gloss Level: 9
– We applied 1 coat of the V-Seal Industra-Gloss to our stamped concrete. It applied at 150 sq. feet per gallon and the result was a gloss sheen. We did not bother applying a second coat as it did not need it.
H&C Concrete Sealer Wet Look Review
H&C Sealer Wet Look
H&C Concrete Sealer Wet Look Water-based is a premium quality 100% clear acrylic sealer that will enhance and protect previously coated, bare concrete, and other masonry surfaces. It is a single component, nationally compliant sealer that can be applied to both interior or exterior applications. H&C Concrete Sealer Wet Look Water-based will apply milky white to ensure complete coverage but dries to a transparent, durable gloss finish.
Tested on Brick Pavers – 2 coats applied.
H&C Concrete Sealer Wet Look Scores (1-10)
Wet Look: 5
– Being that this sealer is H&C’s designated “wet look” sealer, we expected a much richer look. The sealer did darken the surface but only slightly. Not on par with other water based sealers and not even close to a good solvent based sealer.
Gloss Level: 4
– H&C Wet Look Sealer had little to no gloss for the first coat and a matte sheen after the second coat.