Posts Tagged ‘Concrete Sealing Product Reviews’
SuperSeal25 Semi-Gloss Paver and Concrete Sealer Review
SuperSeal25 Concrete Sealer
Update May 2017
As of 2017, we have found that the Super Seal 25 Semi-gloss is one of the most popular sealers for Stamped Concrete, Brick Pavers and other Decorative Concrete Surfaces. If you have any questions on this product, please ask below in our Q&A area. We are here to help!
SuperSeal25 is a Semi-Gloss Concrete Sealer that can be used for Brick Paver Patios, Exposed Aggregate, and Stamped Concrete. This sealer will darken the appearance and leave a shine similar to a semi-gloss.
The SuperSeal25 is a 25% solid solvent based breathable acrylic sealer and curing compound. This product is suitable for use on interior and exterior concrete surfaces.
SuperSeal25 Paver and Concrete Sealer Scores (1-10)
Wet Look: 10
– SuperSeal25 darkened the paver driveway very well giving the surface a much needed enhanced look. All of the colors in the pavers stood out, restoring the original look.
Gloss Level: 8
– SuperSeal25 contains 25% solids. This left a semi-gloss shine to our driveway. The sealer dried in a few hours and we were able to drive on the surface the next day.
MasonrySaver Decorative Concrete Sealer Review
MasonrySaver Decorative Concrete Sealer
MasonrySaver Decorative Concrete Sealer is a non-yellowing acrylic polymer blend sealer formulated for use on properly cured stamped concrete surfaces. MasonrySaver Decorative Concrete Sealer dust proofs concrete with a durable acrylic blend resin. MasonrySaver® Decorative Concrete Sealer leaves an attractive, non-yellowing durable gloss finish that protects concrete from damage and color loss due to ultra-violet light, moisture, and abrasion/wear.
This sealer can be applied on top of previously applied solvent or water based sealers without creating an adhesion issue.
Applied to a Stamped Concrete Patio.
MasonrySaver Decorative Concrete Sealer Scores (1-10)
Wet Look: 7
– The MasonrySaver Decorative Concrete Sealer did darken the surface similar to other water based sealers. Overall enhancing of the surface was acceptable but not as good as a solvent based sealer.
Gloss Level: 8
– We applied 2 coats of the sealer at 150 square feet per gallon. The gloss level was a semi-gloss shine after drying.
Surebond SB-4000 Concrete Sealer Review
SB 4000
SB-4000 Water Repelling Invisible Sealer is a water based, penetrating, low VOC sealer that provides an invisible, durable barrier against liquid absorption on retaining walls, concrete, and pavers. The finish has a natural look that does not affect the appearance of the substrate.
Concrete Sealer Ingredients: Blend of Siloxanes
Concrete Sealer Type: Penetrating Clear Sealer
SB-4000 Concrete Sealer Scores (1-10)
Ease of Application: 10
– The SB-4000 is very easy to apply and dries within an hour. We used a Chapin concrete sealer sprayer and applied 5 gallons of the sealer to 750 sq. feet in under 20 minutes.
Water Repellency: 9
– Surebond SB-4000 has excellent water repellency for the brick blocks. Water beaded up and there was very little penetration, even with a heavy flow of water on the surface.
MasonrySaver Heavy Duty Water Repellent Review
MasonrySaver Heavy Duty Water Repellent
MasonrySaver® (Also known as “Defy”) All-Purpose Heavy Duty Water Repellent is a modified siloxane based product designed to penetrate deeply into most masonry and concrete pores. Unlike acrylics, silicones, and other waterproofing sealers that remain on the surface and trap water vapors, this masonry waterproofing product allows deep penetration of its active ingredient of up to 1/4 inch or more. This proprietary blend of silanes and siloxanes creates a “SaltShield™” barrier on concrete surfaces, for greater resistances to the deteriorating effects of road salts and de-icing chemicals. This 100% breathable concrete waterproofing product is a great choice for both horizontal and vertical above grade surfaces.
Concrete Sealer Ingredients: Blend of Silanes and Siloxanes
Concrete Sealer Type: Invisible Water Repellent. Does not change appearance.
MasonrySaver Heavy Duty Water Repellent Scores (1-10)
Ease of Application: 10
– We applied the MasonrySaver Heavy Duty Water Repellent to a 1000 sq. foot driveway using a plastic pump sprayer. The sealer goes on milky white and dried clear in about 20 minutes. It took less then 30 minutes to seal the entire driveway.
Water Repellency: 8
– We waited a day after application then did a water test. The water did bead up well and did not penetrate into the concrete.
SuperSeal M Concrete Water Repellent Review
SuperSeal M Sealer
SUPER SEAL-M is a water based Silicone Water Repellent made of a special hybrid of Silane and Siloxane. SUPER SEAL-M provides water repellency to porous construction materials such as bricks, stone, concrete blocks, mortar, and grout. It is not suitable for very low-porosity substrates such as polished stone.
The active ingredients in SUPER SEAL-M Water Repellent Sealer are a mixture of different-size particles-some larger, some smaller to fill different size voids. This ensures good penetration into porous substrates, resulting in good coverage and durable water repellency. Additionally, the active ingredients in SUPER SEAL-M Water Repellent can chemically react with the substrate, ensuring long-lasting performance.
Concrete Sealer Ingredients: Blend of Silanes and Siloxanes
Concrete Sealer Type: Penetrating Clear Water Repellent
SuperSeal M Concrete Water Repellent Scores (1-10)
Ease of Application: 10
– The SuperSeal M was applied to a new concrete driveway the day after installation. SuperSeal specifically says that the sealer can be applied to new concrete as soon as the bead water is gone from the install. We used 5 gallons for 1000 sq. feet. It took 30 minutes to apply and did not have any issues.
Water Repellency: 8
– After 3 days we tested the water beading with the garden hose. All of the water beaded up on the driveway with a light mist of water. A heavier saturation and the water still did not penetrate into the concrete.
V-Seal Industra-Gloss SB
V-Seal Industra Gloss SB
INDUSTRA-GLOSS SB is a high-performance proprietary formulation of pure acrylic resin in a solvent base. Can be used as a cure, sealer and as a stain resistant surface protector. INDUSTRA-GLOSS SB is excellent for exterior and interior on most horizontal and vertical surfaces.
Driveways | Patios | Pavers | Stamped concrete | Garages | Showrooms | Exposed aggregate | Decorative Concrete
Tested on Stamped Concrete – 1 coat applied.
V-Seal Industra-Gloss SB Gloss Scores (1-10)
Wet Look: 9
– V-Seal Industra-Gloss SB gave a beautiful wet look to our stamped concrete patio. This sealer enhanced the red and brown colors extremely well. Exactly what you would expect with a high solid, solvent based acrylic sealer.
Gloss Level: 9
– We applied 1 coat of the V-Seal Industra-Gloss to our stamped concrete. It applied at 150 sq. feet per gallon and the result was a gloss sheen. We did not bother applying a second coat as it did not need it.
Behr Premium Waterproofer Review
Behr Concrete Waterproofer
A premium interior/exterior waterproofing formula that uses the latest water-based silicone technology designed to penetrate surfaces up to 1/2″. This waterproofer creates a barrier inside the surface that keeps water out, but lets trapped water vapors escape; reducing corrosion, spalling, efflorescence and freeze-thaw damage. It reduces staining due to mold, mildew, algae growth and ensures greater durability of the surface. The protection is not worn away with normal use. It protects long after the water beading is gone!
Concrete Sealer Ingredients: Silicon
Concrete Sealer Type: Invisible Water Repellent. Does not change appearance.
Behr Premium Waterproofer Scores (1-10)
Ease of Application: 7
– The Behr Premium Waterproofer is very thin in consistency and looks like you are applying white water. The issue we had is that the sprayer kept getting clogged from large white chunks in the sealer. After running the sealer through a screen, we did not have any more issues. Very frustrating though!
Water Repellency: 7
– After a few days, we tested the Behr Premium Waterproofer with a hose. Light saturation on the water beaded well. Heavy saturation and the sealer did not repel the water very well.
H&C Concrete Sealer Wet Look Review
H&C Sealer Wet Look
H&C Concrete Sealer Wet Look Water-based is a premium quality 100% clear acrylic sealer that will enhance and protect previously coated, bare concrete, and other masonry surfaces. It is a single component, nationally compliant sealer that can be applied to both interior or exterior applications. H&C Concrete Sealer Wet Look Water-based will apply milky white to ensure complete coverage but dries to a transparent, durable gloss finish.
Tested on Brick Pavers – 2 coats applied.
H&C Concrete Sealer Wet Look Scores (1-10)
Wet Look: 5
– Being that this sealer is H&C’s designated “wet look” sealer, we expected a much richer look. The sealer did darken the surface but only slightly. Not on par with other water based sealers and not even close to a good solvent based sealer.
Gloss Level: 4
– H&C Wet Look Sealer had little to no gloss for the first coat and a matte sheen after the second coat.
Super Diamond Clear Sealer Review
Super Diamond Clear
SUPER DIAMOND CLEAR is a solvent based curing and sealing compound specially designed to cure new concrete, assuring proper cement hydration and strength gain, while providing a non-yellowing seal to protect and enhance the appearance of concrete.
Super Diamond Clear Sealer Scores (1-10)
Wet Look: 9
– We were very impressed with the Super Diamond Clear darkening/enhancing the stamped concrete patio. The overall look and colors were enhanced well.
Gloss Level: 8
– Super Diamond clear contains 25% solids according to the manufacturer. This sealer left a nice semi-gloss shine to the stamped concrete patio. We did notice that the Diamond Clear looked stunning when dried.